How to Read the Orangr Barcodes Manually

Troubleshoot Your Barcode Scanner

Review these tips to troubleshoot your Bluetooth or USB barcode scanner.

Troubleshoot Bluetooth Barcode Scanners

• Confirm you're using an iPad or iPhone with a Bluetooth scanner. Android devices aren't supported at this time.

• Bank check that your scanner is fully charged.

• Make sure the scanner is paired to your iOS device and not to another device.

• Check that Bluetooth is turned on within your iOS settings. If enabled, turn it off and back on.

What do the lights mean?

Socket Mobile Bluetooth Scanners come up with ii indicator lights, a dark-green light for battery and a blue light for bluetooth.

Light-green Bombardment Indicator Light

Blue Bluetooth Indicator Light

Reset your Bluetooth Barcode Scanner

You tin also manufactory reset your Bluetooth barcode scanner. To do so:

1. Turn on the barcode scanner.

2. Press and hold the trigger button while pressing the power push button. Later on 15 seconds, the scanner will beep.

3. Release the trigger button. The scanner will beep five times and ability off.

4. Plow the scanner dorsum on and scan the barcode beneath:

Troubleshoot USB Barcode Scanners

In case you're having trouble connecting your USB scanner, give the following troubleshooting steps a try:

1. Brand sure your Foursquare hardware (Foursquare Stand, Square Register, or Square Final) is plugged into an hardware hub, and that the hub is plugged into a power adaptor.

2. Clear the hardware hub of any debris or dust.

3. Plug the USB scanner into a different port on the hardware hub.

4. Refer to the Quick Start Guide included in the packaging of your USB scanner. Select the quick guide specific to your USB scanner.

• The Zebra LS2208 guide starts factory reset instructions on page 3.

• The Honeywell Hyperion 1300g guide begins factory reset on page 1.

• The Honeywell Voyager 1200g instructs factory reset starting on page 9.

If y'all're having issues with your USB scanner and aren't receiving any error letters, you'll desire to try restoring the factory settings.

For the Zebra scanner:

1. From page three of the Quick Commencement Guide, scan the barcode labeled Prepare Factory Defaults while the scanner is plugged into the USB hardware hub.

2. Unplug the USB scanner and plug it back into the hardware hub.

If you connect your USB scanner and receive an error message that states "USB DEVICE IS NOT COMPATIBLE," or your scanner appears to not be recognized by the Foursquare device, you'll need to ensure that your scanner is prepare to the right mode. To do and so:

1. From page iv of the Quick Start Guide, scan the barcode labeled USB Keyboard HID while the scanner is plugged into the hardware hub.

2. Unplug the USB scanner and plug it back into the hardware hub.

If you do not have the Quick Kickoff Guide that was included in the original scanner packaging, print a copy from a uniform device. You are unable to scan the included barcodes from a monitor or screen. If you continue to feel issues with your hardware, you tin contact Motorola at 1-800-653-5350. Honeywell's back up tin can exist contacted directly at 1-800-782-4263.

Annotation: If you are having trouble pulling upwardly your onscreen keyboard, double click the power push on the scanner.

Help us improve our Support Center. Was this article helpful?

How can nosotros improve this article?

This feedback is used only to improve this Support Center commodity and is not sent to our Support team. Questions requiring a respond tin be sent from the contact link at the top of this page.

Thank you for the positive review!

Thanks, we'll work on improving this commodity.
Have a question? Contact united states of america.

Related Articles

Tin can't find what you demand?

wickerarly1970.blogspot.com

Source: https://squareup.com/help/us/en/article/5516-troubleshoot-your-bar-code-scanner

Share this post